在線檢測平臺
Jumbo roll width |
放卷最大寬度 |
1400mm |
Diameter of roll |
放卷最大直徑 |
Ø800mm |
Diameter of rewind |
收卷最大直徑 |
Ø800mm |
Inner dia. of paper core |
紙管或塑料管內徑 |
3'' |
Mechanical speed |
機器速度 |
300m/min |
Total power |
整機功率 |
15kw |
重量 |
4500kg |
1. 性能和特點:
該機器主要適用于檢測BOPP,PET,CPP,PVC鋁箔或紙張表面的印刷瑕疵檢測。
2. 主要配置:
1. 牽引: 安川伺服電機1套
2. 收卷:安川伺服電機1套
3. 放卷:安川伺服電機1套
4. 放卷糾偏采用臺灣品牌
5. 放卷和收卷采用無軸液壓提升,獨立的伺服電機控制張力
6. 放卷和收卷壓輥采用電機加氣缸的原來,由PLC集中控制,實現恒定壓力
7. 整機采用PLC集中控制
8. 自動模式:當在線檢測系統檢測到瑕疵點,機器自動停機,并且倒轉到瑕疵點,操作員人工剔除
9. 半自動模式:當在線檢測系統檢測到瑕疵點,機器不停,檢測系統自動記瑕疵點到系統中,等整卷料走完,集中剔除
2. Performance and Characteristics:
1. Main Motor: 1 pc servo motor with pulling roller.
2. Rewind motor: 1 pc servo motor.
3. Unwind motor: 1 pc servo motor.
4. Automatic EPC for unwind.
5. Equipped with shaft-less for unwind and rewind's material loading. unwind and rewind's tension are from separate servo motor.
6. Pressure roller for rewind and unwind to make rewinding roll more uniform.
7. Machine's totally controlled by PLC.
8. Automatic mode: When a defect is detected, the machine reduces its speed until it stops rewinding, than the film is automatically rewound back and the defect area stops over an inspection plate for visual examination.
9. Semi-Automatic mode: When a defect is defected, the machine does not reduce the speed, it will save the data with photos in the computer and keep inspection after rewinding is finished, when the inspection is done, the computer will show all the defect details and photos, when click the defect through by the computer, the machine auto rewound back and the defect area stops over an inspection plate for visual examination.